Detailed Product Description

*Specification: SCW-I SCW-II SCW-III input rated voltage: 220V 380V 380V frequency: 50/60Hz 50/60Hz 50/60Hz Rated power: 7KW 10KW 13KW Rated current : 32A 20A 20A Steam spray gun: one two two Hose Length: 1*10m 2*10m 2*10m Long gun for engine: one one one ******************************************************************** Design pressure: 8mpa Operating pressure: 0.8mpa Steam temperature: 60-70 degree Preheating time: 10minutes Water tank: 38L Dimension: 880*440*660mm Weight: 75kgs Available body materials : galvanized sheet or 304 stainless steel. Normally, it only costs 1 liter of water and 1 degree of electricity during the car washing process. *Characteristics The steam car wash is less bulky, light weighted and high in mobility.size:880x660x440mm.Once the power is turned on, its full automatic process will be accomplished. During the washing process, and the dirt discharge is not required. Other distinctive qualities of the steam car wash are engine cleaning and internal cab beautification. The product also unleashes advantage in winter, as it will still work as normal even when the temperature is down to -30 degree, helping to solve winter problems. It is approved by the authority that only one liter of water is required for one time washing process, which saves 60 to 100 liters of water; no added washing liquid is needed and it does not generate any sewage and other pollution; the inside high temperature steam kills gems and bad smells effectively. * Safeties 1. The buyer must install leakage proof switch which is >=40A and socket which is also >=40; then connect the socket properly to the floor. 2. 1) the first protection -- the pressure vessel is produced by using 3-4mm 316 stainless steel; the designed pressure is 8Mpa, and the actual pressure is 0.6-0.8Mpa. 2) The second protection -- during the process, when the pressure reaches the pre-set pressure, the pressure switch would be cut off automatically and the heater will stop working. The pressure maintains within the pre-set range. 3) The third protection -- when the pressure excesses the pre-set pressure, the safety valve will initiate the pressure reducer automatically.