|Baud rate||921K bps|
|Place of Origin||Taiwan|
|10/100BaseT Ethernet Port||Compact (52.6x38.0mm)|
|Up to 3.5 serial channels||Superior upgrade to EM1202EV|
|Power input/output through the serial connector||Free serial-over-IP Tibbo BASIC application available|
The DS1206N is a BASIC-programmable board designed primarily for serial-over-IP and serial control applications. Being small enough to fit inside your product, the board offers a rapid development alternative to using modules, which require designing a new host PCB.
Like the DS1206 controller, the DS1206N features a multi-channel serial port. The device has a single serial port connector and is priced as a single-port device, yet packs four independent serial channels. Have no use for those DSR and DTR lines? Turn them into RX and TX of an additional serial channel. Don't want CTS and RTS either? That's one more channel! In total, there are 15 different configurations to choose from.
The board is supplied in three versions offering various serial port and power options. It comes preloaded with a fully functional serial-over-IP application.
Three options: DS1206N-RS, DS1206N-TM, and DS1206N-TS.
Based on high-performance purpose-built 88MHz T1000 IC.
10/100BaseT, auto-MDIX Ethernet port.
Up to 3.5 serial channels:
DS1206N-RS: RS232 port (DB9M connector);
DS1206N-TM, "-TS": TTL serial port ("pin header" connector);
Baudrates of up to 921,600bps;
None/even/odd/mark/space parity modes;
7/8 bits/character modes;
Full-duplex mode with optional flow control;
DS1206N-TM and "-TS": half-duplex mode with direction control;
Flexible mapping with 15 different options, such as:
A single channel: RX, TX, CTS, RTS, DSR, and DTR lines;
3.5 channels: RX, TX, RX2, TX2, RX3, TX3, and RX4 lines.
DS1206N-RS: optional "12V" power output on DB9M connector;
DS1206N-TM: optional "12V" power input from the serial port.
Up to 1024KB flash memory for firmware, application, and data.
2KB EEPROM for data storage.
Green and red status LEDs on top of the device;
Link and speed Ethernet status LEDs on the RJ45 jack.
Software-controlled onboard PLL.
DS1206N-RS, "-TM": onboard regulator, 10-24V (12V nominal);
DS1206N-TS: direct 3.3V input (must be regulated to +/- 5%).
Board dimensions: 52.6x38.0mm.
Firmware is upgradeable through the serial port or network.
|Available models and their features||DS1206N-RS|
|RS232 Transceiver and DB9M connector||YES||NO|
|TTL interface connector||NO||YES|
|Power Jack and 12V-to-3.3V regulator||YES||NO|
DS1206 BASIC-programmable controller
Sock socket comms (up to 16 UDP, TCP, and HTTP sessions).
Net controls Ethernet port.
Ser in charge of serial channels.
Io handles I/O lines, ports, and interrupts.
Fd manages flash memory file system and direct sector access.
Stor provides access to the EEPROM.
Romfile facilitates access to resource files (fixed data).
Pat "plays" patterns on green and red status LEDs.
Button monitors the setup button.
Sys in charge of general device functionality.
Function Groups: String functions (21 in total!), date/time conversion functions, and hash calculation functions (md5 and sha1).
Variable Types: Byte, char, integer (word), short, dword, long, real, string, plus user-defined arrays and structures.
|Company Name:||Tibbo Technology Inc.|
|Street Address:||9F-3, No.31, Lane 169, Kang-Ning St,, Hsi-Chih, Taipei, Taiwan|
Other Products from this Supplier